You are not logged in.

#1 2018-01-27 08:21:59

enameledaluminumwire
Member
Registered: 2018-01-27
Posts: 2

Xinyu Enameled Copper Wire with high temperature

Use of enameled wire Notes on work: Film damage (scratch) Injury: enameled wire surface insulation is a thin film, scratched easily rubbed at high speed winding. Tension: improper tension during winding process will lead to smaller enameled wire conductor diameter, due to the deviation of resistance, the proper tension adjustment must be based on winding type, speed, wire size debugging, in principle, the conductor is not pulled small tension Control range. Winding process Machine start and stop time speed, tension can be properly debugged, can not have the force generated, leading to the first line, the tail of the conductor pull small phenomenon, and in the winding process contact corner parts to maintain a certain degree of smoothness, Generally wear-resistant easy to slip jet magnetic conductor or magnetic eye.

Advantages Of Enameled Copper Wire:

a) High resistance to heat shock.

b) High temperature.

c) Good performance in cut-through.

d) Suitable for high-speed automated routing.

e) Able to be direct weld, with no pinhole.

f) Resistive to high frequency, wearing, refrigerants and electronics corona.

g) High breakdown voltage, small dielectric loss angle.

h) Environment-friendly.

Get more information to visit Enamelled Wire manufacturer http://www.xinyu-enameledwire.com/ .

Offline

Board footer